Nominal system capacity Ton 6 8 10
Model name AOU72RLAVL AOU96RLAVL AOU120RLAVL
NOTES:
•
Specifications are based on the following conditions:
– Cooling: Indoor temperature of 80 °FDB/67 °FWB (26.7 °CDB/19.4 °CWB), and outdoor temperature of 95 °FDB/75 °FWB (35.0 °CDB/23.9 °CWB).
– Heating: Indoor temperature of 70 °FDB/60 °FWB (21.1 °CDB/15.6 °CWB), and outdoor temperature of 47 °FDB/43 °FWB (8.3 °CDB/6.1 °CWB).
– Pipe length: 25 ft (7.5 m), Height difference: 0 ft (0 m). (Between outdoor unit and indoor unit.)
• Protective function might work when using it outside the operation range.
• *1: Electrical data is only for outdoor unit.
• *2: Refer to "Power supply cable" in Chapter 6. SYSTEM DESIGN on page 06-50 when selecting the circuit breaker.
• *3: Sound pressure level:
– Measured values in manufacturer’s anechoic chamber.
– Because of the surrounding sound environment, the sound levels measured in actual installation conditions might be higher than the specified values here.
• *4: Minimum Circuit Ampacity (Calculation based on UL1995)
• *5: Maximum Circuit Breaker
• *6: When installation position of the outdoor unit is lower than the indoor unit, the operation temperature range is 23 to 115 °FDB (-5 to 46 °CDB).
• *7: The cooling operation range of 5 to 115 °FDB (-15 to 46 °CDB) is allowed only when all of the connected indoor units are higher than capacity of 18,000 Btu/h (5.3 kW).
2-1. Stand-alone - (03-3) - 2. Specifications
OUTDOOR
UNITS
OUTDOOR
UNITS
To Next Page
Loading...
