Fujitsu AIRSTAGE UTY-DCGGZ2 - Page 14

En-14
No. Item Description

All R.C.G. On/Off
When the password setting is valid, input the password after selecting the
process in the followings.
“All ON”: Sets all R.C.G. registered to this controller to ON collectively.
TheoperationofallR.C.G.isturnedOnorOffcollectively.→Refer to
2-1-1.
“Detail”:Setstheoperationcontentsindetails.→Refer to 2-2-2.
On/Off icon: Colorfully indicates the ratio of operation On status for the
number of registered R.C.G..
Green: Operation On status, Gray: Operation Off status

Special state display
Only when even one registered indoor unit or outdoor unit is in the
following special state, the icon is displayed.
Icon State
Refrigerant leakage
Emergency stop
Maintenance mode / Bus priority
3
Date Displays the date and time.
4
Error display
When even one unit is abnormal in the registered indoor units or outdoor
units, [Error] icon is displayed.
Displays error information as follows:
• “Error Code”: Displays the error code.
• “Address”: Displays the address of the unit where an error occurs.
• “Model Name”: Displays the model name of the unit where an error
occurs.
• Model Name: Displays as follows:
Outdoor unit: Outdoor Unit
Indoor unit: Group name or R.C.G. name
This controller: Central Controller
5
[Schedule] icon Displaystheoperationschedulesettingscreen.→Refer to 2-3.
6
[Change Items] icon Setsthecontentstobedisplayedonthescreen.→Refer to 2-1-1.
7
Display switch-over
Switches over between the monitoring point display and 50 units display
alternately.
8
Menu button
Displays the Setting Menu screen by tapping this button which is always
displayed.→Refer to Chap. 3.
9
Group display
Displays the groups which were already set. Displays the group operation
status.→Refer to [Table 1].

Group name Display the group name.

Group operation status
Setstheoperationcontentsofthetappedgroup.→Refer to 2-2-2.

Group expansion Expands the R.C.G. registered to the group by tapping.

Group scroll button
When the number of registered groups exceeds the maximum display
limit, the right and left scroll buttons are displayed.

R.C.G. display
Displays the R.C.G. registered to the group. (The registered R.C.G. are
displayed from left to right and from the top in ascending order of system
No. and unit No.)

R.C.G. name Displays the R.C.G. name.

R.C.G. operation status
DisplaystheR.C.G.operationstatus.→Refer to [Table 1].
SetstheR.C.G.operationcontents.→Refer to 2-2-2.

R.C.G. scroll button
When the number of registered R.C.G. exceeds the maximum display
limit, the right and left scroll buttons are displayed.