Fujitsu AIRSTAGE UTY-DCGGZ2 - 2-3. Schedule Setting

En-21
2-2-2-4. HumanSensorSetting
Sets enabled or disabled state of “Human sensor” function.
After human is not detected and the
set time has passed, when “Auto
Save”operation or “Auto On/Off” operation
starts actually, “Operating” is displayed at
“Auto Save” or “Auto On/Off”.
  3
4
5
No. Item Description

“Auto Save” enabled/disabled
Sets enabled or disabled state of “Auto Save”. When “Auto Save” is
enabled, select the set time from 15, 30, 45, 60, 90, 120, and 180 minutes.
To disable “Auto Save”, select “Disable”.

“Auto On/Off” enabled/disabled
Sets enabled or disabled state of “Auto On/Off”. When “Auto On/Off” is
enabled, select the set time from 15, 30, 45, 60, 90, 120, and 180 minutes.
To disable “Auto On/Off”, select “Disable”.
3
“Auto Off” enabled/disabled
Sets enabled or disabled state of “Auto Off”. When “Auto Off” is enabled,
select the set time from 1 to 24 hours (with one-hour increment) To disable
“Auto Off”, select “Disable”.
4
[Cancel] button Cancels the input.
5
[OK] button Determines the input.
2-3. ScheduleSetting
When the password is set at start-up, enter the password. (Refer to 3-2-5.)
(1) Tap the [Schedule] icon of left menu on the monitoring
screen.
(2) Tap [Create New Schedule] or schedule name. The pop-up of
schedule detail setting is displayed.
(When the schedule is not set, [Create New Schedule] is
displayed. If the schedule is already registered, the name is
displayed.)
2-3-1. ScheduleDetailSetting
Set the details of schedule.

4
6
7
8
5

3
9

(1)
(2)