Fujitsu AIRSTAGE UTY-DCGGZ2 - Page 22

En-22
No. Item Description

“Enable” / “Disable” display Sets “Enable” or “Disable” for the registered schedule.

Schedule name
Registers the schedule name. (Max. 13 characters) Up to 20 schedules
can be registered.
The names can be input using keyboard and they can also be selected
fromthexedformphrase.
¡ Input candidate:
“Floor”/“Corridor”/“Whole”/“Hall”/“Ofce”/“Confroom”/“Receipt
room” / “Restaurant” / “Café” / “Lounge” / “Kitchen” / “Store” / “Stock room”
/ “Classroom” / “Reception” / “Entrance” / “Control room” / “Guest room”
/ “Room no.” / “Locker room” / “Summer set” / “Winter set” / “Weekday” /
“Holiday”
*WhenthesimpliedChineseissetatLanguageSetting,thecandidates
are different.
3
[Delete] icon Deletes the currently displayed schedule.
4
[Copy] icon
Newly creates the same schedule as the setting schedules at the end of
the existing schedules and displays the new creation screen.
5
[New] icon
Creates the new schedule at the end of the existing schedules and
displays the new creation screen.
6
Day of week
Switches the timer to be set to the day of week. “Create new timer”, “Day
Off”, “Deregister”, and registered timer can be selected.
7
Setting timer
Displays the setting timer name.
When not set, this column is blank. When Day off is set, “Day off” is
displayed.
8
Schedule switch-over button Switches over the displayed schedule.
9
Registered group Setsthegroupstobecontrolled.→Refer to 2-3-1-1.

[Timer Edit] button
Selectsthenewtimerandregisteredtimerandsetsthedetails.→Refer
to 2-3-2.
2-3-1-1. Group Selection
Set the groups to be controlled.


No. Item Description

Group
Selects the groups to be registered. When selected, the checkbox is
checked.

R.C.G. display button Displays the R.C.G. registered to the group.