En-26
3. SETTING
Set the required basic settings to use this controller. Tap the Menu button and select the menu you want to set. Perform
the setting according to the pop-up.
3 4
Menu button
Menu
No. Menu Seq Submenu Description Chap. No.
“Group Setting” 1 “Create New Group”
Sets grouping, group name operated from
this controller.
3-1-1
“Preference”
1 “Backlight Setting” Sets the backlight of screen.
3-2-1
2 “Panel Calibration” Calibrates the touch panel position.
3-2-2
3 “Sound Setting” Sets the Beep sound.
3-2-3
4 “Date Setting” Sets the date and time.
3-2-4
5 “Password Setting” Sets the passwords.
3-2-5
3
“Maintenance”
1 “Error History” Displays the error history.
3-3-1
2 “Display Sensor Values” Displays the sensor values.
3-3-2
3 “Information” Displays the version information.
3-3-3
4
“Installer Setting”
1 “Language Setting” Sets the languages.
3-4-1
2
“Central controller
Address Setting”
Sets the Central Controller address.
3-4-2
3 “Indoor Unit Registration” Registers the indoor unit.
3-4-3
4 “Temp. Unit Setting” Sets the temp. unit.
3-4-4
5 “Pressure Unit Setting” Sets the pressure unit.
3-4-5
6 “Remote Setting” Sets the remote operation.
3-4-6
7 “External Input Setting” Sets the external input.
3-4-7
8 “Mail Setting” Performs the mail setting.
3-4-8
9 “Timer Setting” Sets the timer.
3-4-9
10 “Initialization” Performs the initialization.
3-4-10
To Next Page
Loading...
