Fujitsu AIRSTAGE UTY-DCGGZ2 - Group Setting

En-28
3-1-2. GroupSetting
Perform the group registration to combine the R.C.G. registered to this controller.
* One group including all indoor units (R.C.G.) registered by scanning is created at initial setting.
(1) Tap the MENU button.
(2) Tap the [Group Setting].
(3) Tap the [Create New Group] or group name.
(4) Register the group name and select the R.C.G. for each
group. (The R.C.G. selected by other groups can be selected
redundantly.)
(5) Set the item and tap the [OK] button.
No. Item Description

Group name
Registers the group name. (Max. 13 characters) Up to 50 groups can be
registered.
The names can be input using keyboard and they can also be selected
fromthexedformphrase.

[Delete] icon
Deletes the group. When there is no group after deletion, “There is no
group to display.” is displayed.
3
[New] icon
Adds the group. When the number of registered groups reaches 50, this
button is disabled.
4
“Registered” Indicates that the R.C.G. is already selected by other groups.
5
R.C.G. list
When selected, checkbox is checked. Up to 100 R.C.G. can be registered
for one group.
6
Group switch-over button Switches over the displayed group.
7
R.C.G. scroll buttons
The right and left scroll buttons are displayed when R.C.G. are more than
25.
(2)
(1)
(3)


3
4
7
6
7
5