Fujitsu AIRSTAGE UTY-DCGGZ2 - Page 31

En-31
3-2-4-1. DisplayFormatSetting
Set the display format of date and time.
(1) Set the item and tap the [OK] button.
No. Item Description

“Date Format”
Selects from the followings.
“Day/Month/Year”
“Month/Day/Year”
“Year/Month/Day”

“Time Format”
Selects from the followings.
12:00 - 11:59 AM/PM
00:00 - 11:59 AM/PM
00:00 - 23:59
3-2-4-2. DateandTimeSetting
Set the date and time of the system.
(1) Set the item and tap the [OK] button.
No. Item Description

“Date”
Sets the system date. Tap the year,
month, and day respectively. (*)

“Time”
Sets the system time. Tap the hour and
minute respectively. (*)
3
“Summer Time
Setting”
When summer time system is used, tap
the [Enable].
4
“Time Zone
Setting”
In the displayed list as shown at the
leftgure,setthetimezoneofthearea
where this controller is installed.
* “Date” and “Time” are displayed in the format set at 3-2-4-1
DisplayFormatSetting.
3-2-4-3. System Clock Adjustment
Perform the system clock adjustment.
(1) Set the item and tap the [OK] button.
No. Item Description

“Master/Slave”
Selects from the following 3 types.
“Master” / “Slave” / “Disable”

“Current time
transmission”
Transfers the current time.
3
“Clock
Adjustment
Schedule”
Selects the clock adjustment schedule
from “Daily” or “Weekly”.
4
Day
Selects the day of week when “Weekly”
is selected.
“Sun” / “Mon” / “Tue” / “Wed” / “Thu” /
“Fri” / “Sat”
5
Time Selects the time for clock adjustment.


 3
4



3
4 5