Fujitsu AIRSTAGE UTY-DCGGZ2 - Temp. Unit Setting; Pressure Unit Setting

En-38
3-4-4. Temp.UnitSetting
Set the temp. unit to be used by this controller.
(1) Tap the MENU button.
(2) Tap the [Installer Setting].
(3) Tap the [Temp. Unit Setting].
(4) Tap the temp. unit [ºC] or [ºF].
3-4-5. PressureUnitSetting
Set the pressure unit to be used by this controller.
(1) Tap the MENU button.
(2) Tap the [Installer Setting].
(3) Tap the [Pressure Unit Setting].
(4) Tap the pressure unit [MPa] or [psi].
(1)
(3)
(2)
(1)
(3)
(2)