Fujitsu AIRSTAGE UTY-DCGGZ2 - Initialization

En-43
(When “Operation Stop Time” is selected) (When “Start Time” and “End Time” are selected)
3-4-10. Initialization
Perform the Initialization of this controller.
Allregisteredcontentswillbedeletedandreturnedtothefactorydefaultsettingbythisfunction.
Pleaseusethisfunctionwithgreatcaution.
(1) Tap the MENU button.
(2) Tap the [Installer Setting].
(3) Tap the [Initialization].
(4) When initializing this controller, tap the [OK] button.
Wait for a while without turning off the power.
After the initial setting screen appears, set according to the
wizard.→Refer to 1-5.
(2)
(3)
(1)