Fujitsu AIRSTAGE V-II - Page 12

ENERGY EFFICIENCY COMBINATION

ECONOMY OPERATION

Economy operation can be set by remote
controller.
The temperature setting is offset automatically
over a certain period of time.
ROOM TEMPERATURE SET

POINT LIMITATION
The minimum and maximum temperature range
can be set giving further energy saving while
considering the comfort of the occupants.
PEAK CUT OPERATION

Operation capacity can be set in 4 steps for rated
capability.
The power consumption at peak is cut down and
the maximum load is suppressed.
AUTO-OFF TIMER

Each remote controller is equipped with an OFF
timer function that automatically stops operation
when a xed time has elapsed from the start of
operation. This prevents wasteful operation. (NB
Except simple remote controller)
[For 16HP]
18%
energy saving !
12%
energy saving !
10%
energy saving !
[For 24HP]
12HP 12HP
[For 28HP]
12HP16HP
16HP
8HP 8HP
8HP 8HP 8HP
12HP 8HP 8HP
[Space saving combination] [Energy efciency combination]
Cooling Set Temperature
Economy operation
Control Temperature
Heating Set Temperature
Economy operation
Control Temperature
Set Temp.
MAX. -4°C
MAX. +2°C
Economy operation
Up
Up
Economy operation
Set Temp.
Down
Down
Down
Down
Heating set
temp. range
Cooling set
temp. range
Heating Cooling
Original Set
temp. limitation
Set point
limitation setting
°C
30
28
26
24
22
20
18
16
14
12
10
Operation setting (System Controller)
W
Capacity
Time
Setting level
Peak cut
Control
device
Signal input
(Comparison of average COP)
- (01 - 02) -
GENERAL INFORMATION GENERAL INFORMATION