1-1-5. MORE COMFORT & CONVENIENCE
LOW NOISE MODE

Two low noise modes can be selected automatically by quiet priority setting and capacity
priority setting depending on the usage environment and outside temperature load.
SELECTABLE AUTO CHANGEOVER FUNCTION

Auto changeover setting allows for the product to easily switch between Cooling and heating
modes regardless of the operation mode of other indoor units. This can be done via speciîš¿c
indoor unit remote controller and/or by an external input control. This ensures comfortable
operation all year round.
LOW NOISE DESIGN

Compressor noise has been signiîš¿cantly
reduced by shielding the compressor
compartment.
INDOOR UNIT

Low noise indoor unit lineup
100%
58dB
0
0
Heat loadHeat load
Air
conditioning
load factor
Quiet priority low noise mode
Quiet priority setting
Capacity priority low noise mode
Capacity priority setting
Reset automatically
Alternated
automatically
Operating
sound
Capacity
Down
(time) (time)
Compressor compartment
Compact Duct Compact Cassette
Low Static Pressure Duct Compact Wall Mounted
Various remote controllers
connected to indoor unit
Command for operational
mode switching is controlled
by one of the following options.
1 selected from the following:
External input terminal of
outdoor unit
System controller
Switching to cooling and
heating mode by speciîš¿c
remote controller in the
main room, etc.
1
2
3
- (01 - 09) -
GENERAL
INFORMATION
GENERAL
INFORMATION
To Next Page
Loading...
