EMERGENCY STOP

Emergency alarm can be received by indoor, outdoor units or Touch Panel Controller when
they received it, all units will be stopped.
NON-STOP OPERATION

When servicing a speciîš¿c indoor unit, maintenance can be performed even without turning off
the other indoor units.
TROUBLE DIAGNOSIS BY SERVICE TOOL

Suitable maintenance is possible by analysis of the operation data. Connection anywhere in
the VRF network is easy.
Touch Panel Controller
Emergency stop function
Emergency stop function
Emergency stop function
Note : In case of received Emergency alarm by Indoor/outdoor unit: All units connected within same refrigerant
system will be stopped. Touch Panel Controller: all unit connected within VRF network system with Touch
Panel Controller will be stopped.
Outdoor unit
Software
Transmission line
USB adaptor
(Field supplied)
Service Tool
Indoor unit
Easy to carry
out with USB
adaptor
On On On On On
Undergoing
maintenance
- (01 - 12) -
GENERAL
INFORMATION
GENERAL
INFORMATION
To Next Page
Loading...
