REPLACEMENT PARTS
03-54
PROCESS
MODEL : AOU36RML
USED
PARTS
Fig.1
Through the hole.
W303 BLACK,W304 WHITE,W305 RED
(MAIN PCB)
WIRE WITH CONNECTOR
BINDER C
Closeup
Fig.2
Bind wire to
INVERTER BOX A.
Closeup
The binder uniting part is a thing that
the base point line is not exceeded
18~20mm
Reference line
HOLDER(THERMO)
Installation position
Tumor part of INVERTER BOX A
INVERTER BOX A
is the highest
BINDER C
Bind WIRE WITH CONNECTOR.
(COMP WIRE)
REGULATIONS
As shown in the figures, set WIRE WITH CONNECTOR and bind it to INVERTER BOX A.
The wire must not come in contact with the HOLDER(THERMO) SUS304 CSP-H T0.5
Through the guide.
INVERTER BOX A
1
1
BINDER C
1
To Next Page
Loading...
