Operation
Adjusting the display of the OSD menu
Calling the OSD Setup adjustment window
Language
Selecting the language for the OSD menu
With this function you choose between English (d efault se tting), French,
German, Italian and Spanish as the language fo r the OSD menu.
OSDH position
Setting the horizontal position of the OSD menu
With this function you can move the OSD menu to the left or to the right.
OSDV position
Setting the vertical position of the OS D menu
With this function you can move the OSD menu up or down .
OSDTimeout
Setting the display duration of the OSD menu
With this fun ction you can select a value fro m 10 to 120 seconds.
If the set time expires without a setting being made, the OSD m enu is
automatically hidden.
Setting functions in the Adva
nced menu
Call up the Advanced setting window
Input select
Selecting the input signal
This function allows yo u to switch the monitor from analogue to digital mode
and vice versa, when two signal sources are connected.
This requires t hat the graphic card used supports this function.
DDC-CI
Activation/deactivation of the DDC -CI
On = The DDC-CI function is enabled (standard setting)
Off = The DDC-CI function is disabled
Factory Recall
Activating the factory settings
With this function all s ettings a re reset to the facto ry settings without
prompting for confirmation .
Press the
SELECT/MENU
button to activate the function. The Auto
Processing message is displaye d.
Displaying information
Call the Informatio n setting w indo w
With this function the m ode l designation, serial number, resolution, H/V
frequency, input s ignal and polarity of the synchron isation s ignal are
displayed.
20 A26361-K1334-Z220-1-7619, edition 1
To Next Page
Loading...
