Getting started
Adjusting t he rotation
The monitor can be rotated by ±172°.
► Grasp the monitor with both hands on th e right and left edge of the casing
and turn it to the desired position.
Adjusting portrait format
The monitor can be rotated
from horizontal format (landsca pe mode) into
vertical format (portra
it mode).
► Grasp th e monitor with bo
th hands on the right and left edge of the casing, move it into
the highest position an
d turn it clockwise until it is in the portrait position.
► To set the screen ba ck into landscape mode, rotate it back anti-clockwise.
The screen supports the "Autorotation" function with the associated software
(DisplayView), which is used to adapt the display to the orientation of the screen
(see "
Notes on the program "DisplayView"", Page 35 ).
For you to be able to display the screen contents in portrait mode, you r graphics card
will also need to support this function or you will need to use special software.
In the OSD menu you have the option of switching the OSD manually from landscape
mode to portrait m ode (see "
Functio ns of the control panel and the OSD m enu", Page 21).
To reset the monitor to landscape mode, the monitor should be turned anti-clockwise.
The OSD display can be rese t a gain in the O SD menu.
Fujitsu 15
To Next Page
Loading...
