Operation
Setting screen display
IMAGE
Phase
Clock
H-Position
V-Position
Sharpness
Saturation
Hue
Expansion Full Screen
50
50
50
50
50
100
100
MENU
Image
Picture in Picture
OSD
Advanced
Information
► Press the button to c all up the main menu.
► Press the butt
on to switch to the Image submenu.
► Press the
/ button to mark a function in the submenu.
► Press the
/ or
/ button to make the desired setting.
► Press the
button to save the settings and return to the main m enu.
Function Description
Phase
Eliminate picture disturbance
With this fu nction you fine-tune your monitor to eliminate picture disturbance.
This setting only appe ars with an analogue video signal (e.g. VGA).
Clock
Set synchronisation
With this function you adjust the picture width to eliminate vertical picture
disturbances.
This setting only appe ars with an analogue video signal (e.g. VGA).
H-position
Adjust the horizontal position
With this function you move the p icture to the left or to the right.
This setting only appe ars with an analogue video signal (e.g. VGA).
22 Fujitsu
To Next Page
Loading...
