Fujitsu B27-9 TE QHD - Adjusting the Brightness and Contrast

Operation
Adjusting the brightness and contrast
BRIGHTNESS/CONTRAST
Brightness
Contrast
Black Level
ACR
Auto Brightness
Lighting Guide
Auto Level
75
50
50
Off
Off
Off
► Press the button to open the BRIGHTNESS/CONTRAST setting
window.
► Press the
/ or / button to m ake the desired setting.
► Press the
button to save t he settings and close th e menu.
Function Description
Brightness
Set the brightness of the display
With this function you change the brightness of the background lighting.
Contrast
Set the contrast of the display
With this function you modify the contrast o f bright colour tones.
If the contrast is set too high, bright surfaces can no longer be distinguished
from very bright surfaces. If the contrast is set too low, the maximum
brightness will not be achieved.
Black level
Set the brightness of the display
With this fun ction you mod ify the contrast of dark colour tones.
ACR
Enable/disable dynamic contrast
This function improves the contrast by automatically controlling the
background lighting i n relation to the image being displayed.
This setting can only be configured in Office and Custom application mode.
As soon as ACR is enabled, Auto brightness is automatically d isabled.
Fujitsu 33