Notes on power management
Notes on power management
If your computer is equipped with power management (power-saving mode), the monitor can fu lly
support this function. Here the monitor does not di stinguish between the individual energy-saving
modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of
immediately switching into the mode with the highest energy-saving effect.
Power consumption
Mode
State
Typical Maximum Power
indicator
Power On –
Maximum mo de
Maximum brightness /
with USB and au dio
60.1 W 65 W
Power On –
Normal mode
Maximum brightness
/ without USB and
audio
25.9 W 31 W
Energy Star Brightness 200 cd/m
2
,
without USB and audio
16.5 W
–
EU Energy Label
Without USB and
audio
21 W
––
ECO Without USB and
audio
20.8 W 23 W
Standby Without USB devices
connected
0.18 W 0.3 W
Off Without USB devices
connected
0.17 W 0.3 W
If the computer detects inactivity (no input) i t sends an appropriate signal to the monitor to reduce
the power consumption (power saving mode). The power indicator of the monitor changes
colour to show the change in status. ECO mode is the preset factory default.
Once an input is made at the computer the screen contents are restored.
For detailed information on how energy-saving mode operates, please refer to
the operating manual or technical manual of the computer.
38 Fujitsu
To Next Page
Loading...
