Fujitsu BS2000 - Device Settings

Periphery ETERNUS LT40 S2 tape library
U41861-J-Z126-4-76 51
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
5. March 2018 Stand 17:23.46 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303919_BA_Additional_update_3\prod_e\ba_addon.k05
4.2.2 Rear panel
The rear panel of the tape library provides access to the SAS or Fibre Channel (FC)
connector, tape drives, the power connector, LAN, and to the serial and USB port.
Figure 23: ETERNUS LT40 S2 rear panel (SAS variant with two drives)
1 Power Supply LED’s from top:
– blue LED on >> AC connected
– yellow LED on >> degraded fan
– green LED on >> Power good
2Air vent
3 Power connector
4 Tape drives
5 SAS or Fibre Channel (FC) connector for each drive
6 Product label foil for each drive
7 Tape Drive LED for each drive
8 LAN port (connected to the Net Unit)
9 Serial port (Customer Support)
10 USB port (Customer Support)
1 2 3 4 5 6 87 9 10
45 67