36
2 Pull the data and the power supply connectors from the floppy disk drive (1).
3 Remove the screws (2) on the left side of the floppy disk drive.
4 Remove the screws (1) on the right side of the floppy disk drive.
You may need to remove the USB front panel (see "Removing a USB front panel") before you
can remove the screws on the right side of the floppy disk drive.
5 Slide the drive carrier out of the system unit in the direction of the arrow.
Changing the floppy disk drive
1 Open the system unit (see "Opening the system unit").
2
1
1
CHAPTER 4 Martini2 (27-44) 12/21/01, 10:15 AM36
To Next Page
Loading...
