42
Replacing processor
To replace the processor you must remove the system board bracket.
1 Open the system unit (see "Opening the system unit").
2 Remove all boards (see "Removing a board").
3 Unscrew the screw on the system board rack (1), push the system board rack somewhat
in the direction of the arrow (2) and then tilt it out upward (3).
Replace the processor.
1 Fold the system board rack into the casing again (1) and push it back into its original
position (2).
2 Fasten the screw (3).
3 Reinstall all boards (see "Installing a board ").
4 Close the system unit (see "Assembling the system unit").
3
2
1
3
1
2
3
1
CHAPTER 4 Martini2 (27-42) 6/12/02, 1:39 PM42
To Next Page
Loading...
