System upgrades
42 A26361-K1006-Z220-1-7619, edition 2
Removing boards
► Open the casing (see "XOpening the casingX").
► Fold up the drive cage (see "
XOpening the drive cageX").
► Disconnect the cables connected to the board.
1
2
► Press on the curved part of the retaining clip (1).
► If you have also secured the board with an additional screw, remove the screw now.
► Pull the board out of the slot in the direction of the arrow (2).
► Place the board into appropriate packaging.
!
For cooling, protection against fire, and in order to comply with EMC (electromagnetic
compatibility) regulations, you must refit the slot cover.
To Next Page
Loading...
