(2) Connect the power cord on the power socket side.
Connect the other end of the power cord plug to a power socket or an inlet on the power distribution
unit.
8 Move the PSU switches for PSU#0 and PSU#1 in the drive enclosures to the ON position (marked "|").
9 In the [Add Drive Enclosure] screen, click the [Next>>] button.
Configuration of IOM#0 in the drive enclosure that is to be added and the power supply units in the system
is performed.
10 Click the [Next >>] button.
The [Connect Cable] screen appears.
5. Component Expansion/Function Enhancement
Installing Additional Drive Enclosures
59
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1842-06ENZ0
To Next Page
Loading...
