Fujitsu ETERNUS CS800 S6 - Page 135

8.2 NAS Wizard
Figure 100: NAS Wizard: About
Step 2: Windows
If you selected the UNIX/Linux (NFS) option in the previous step, the wizard
automatically skips this step and the next step. Continue with "Step 3: Add Share" on
page 137.
1. Select an option for joining the ETERNUS CS800 to the Windows network (see "NAS
Wizard: Windows" on page 137):
l Active Directory - Add the ETERNUS CS800 to a Windows network using Active
Directory
l Workgroup - Add the ETERNUS CS800 to a workgroup on a Windows network
To disjoin a domain, see "Windows Domain" on page 195.
2. In the Domain/Workgroup Name box, enter the name of the domain or workgroup the
ETERNUS CS800 is joining.
ETERNUS CS800 135