10.2 NAS Configuration
1. Select the share and click Delete.
You can select multiple shares to delete at once.
2. Click Yes to confirm the deletion.
10.2.2 Windows Domain
The Windows Domain page allows you to join the ETERNUS CS800 to a Windows
workgroup or a Windows domain using SMB. To use a NAS share configured for the CIFS
protocol on a Windows network, you must first join the ETERNUS CS800 to a workgroup or
a domain. After you join the ETERNUS CS800 to a workgroup or a domain, CIFS shares are
available for use on the Windows network.
To access the Windows Domain page, on the NAS page, click the Windows Domain tab
(see "Windows Domain Page" on page 195).
Figure 142: Windows Domain Page
Tasks
Use the Windows Domain page to perform the following tasks:
l Join the ETERNUS CS800 to a Windows workgroup (see "Joining a Windows Workgroup"
on page 196).
ETERNUS CS800 195
To Next Page
Loading...
