10.3 VTL Configuration
Figure 156: Remote Host Mapping Page
Tasks
Use the Remote Host Mapping page to perform the following tasks:
l View information about existing host access groups (see "Remote Host Mapping And
Groups" on page 221).
l Add a new host access group to a partition (see "Adding a Remote Host Access Group"
on page 222).
l Edit properties for an existing host access group (see "Editing a Remote Host Access
Group" on page 223).
l Delete a host access group from a partition (see "Deleting a Remote Host Access
Group" on page 224).
Remote Host Mapping And Groups
The Remote Host Mapping & Groups section displays the following information for all
host access groups on the ETERNUS CS800:
Group Name The name of the group.
Remote Host The host (initiator) associated with the group.
Target Port The Fibre Channel port (target) associated with the
group.
Partition Name The VTL partition associated with the group.
Devices The number of virtual media changers (VMCs) and virtual
tape drives (VTDs) associated with the group
Click a column heading to sort the rows in the table by that column. Click the
column heading again to reverse the sort order.
ETERNUS CS800 221
To Next Page
Loading...
