Fujitsu ETERNUS CS800 S6 - Page 281

10.8 Notifications
IP Address The IP address of the destination.
Name The name of the destination.
Selected Traps The traps the ETERNUS CS800 sends to the destination
(Failure, Warning, Informational, Available, or
Unavailable).
Adding a Destination
Add an SNMP destination to send traps from the ETERNUS CS800 to the destination.
You can add up to 5 destinations.
To add a destination:
1. Click Add.
The Add Trap Destination page displays (see "Add Trap Destination Page" on page
281).
Figure 193: Add Trap Destination Page
2. Enter information about the destination:
ETERNUS CS800 281