10.8 Notifications
Figure 194: Edit Trap Destination Page
2. Enter information about the destination:
If you are editing a destination, you cannot change the IP Address.
IP Address (Optional) Select a different destination to edit.
Name Enter the name of the destination.
3. Select one or more traps to send to the destination:
Failure Sends failure traps.
Warning Sends warning traps.
Informational Sends informational traps.
Available Sends a trap when the system transitions from an
unavailable to an available state.
Unavailable Sends a trap when the system transitions from an
available to an unavailable state.
4. Click Apply.
Deleting a Destination
Delete an SNMP destination if you no longer want the ETERNUS CS800 to send traps to the
destination.
To delete a destination, select the destination and click Delete.
You can select multiple destinations to delete at once.
ETERNUS CS800 283
To Next Page
Loading...
