Fujitsu ETERNUS CS800 S6 - Page 284

10.8 Notifications
Community
The Community page allows you to manage SNMP community information for the ETERNUS
CS800. You can add, edit, and delete communities, and you can specify the community
access type.
To access the Community page, on the SNMP page, click the Community tab (see
"Community Page" on page 284).
Figure 195: Community Page
Tasks
Use the Community page to perform the following tasks:
l View information about SNMP communities (see "SNMP Community List" on page
284).
l Add an SNMP community (see "Adding a Community" on page 285).
l Edit an SNMP community (see "Editing a Community" on page 286).
l Delete an SNMP community (see "Deleting a Community" on page 288).
SNMP Community List
The SNMP Community List displays the following information about SNMP communities:
Name The name of the community.
IP Address The IP address of the community.
Network Mask The network mask of the community.
Access Type The access type of the community (Get or Get/Set).
Community Status The status of the community (Enabled or Disabled).
ETERNUS CS800 284