Fujitsu ETERNUS CS800 S6 - Contacts; Company

10.10 Contacts
1. Select the port in the list and click Edit.
2. Select the new port mode (Initiator or Target) in the drop-down box (see Figure "FC
Initiators and Targets Page" on page 336).
3. Click Update.
10.10 Contacts
The Contacts page allows you to enter company information. You can also enter individual
contact information for primary and secondary contacts.
To access the Contacts page, click the Configuration menu, and then click the Contacts tab.
The Contacts page contains the following tabs:
l "Company" on page 337
l "Primary and Secondary" on page 338
10.10.1Company
The Company page allows you to enter information about the company and location of
the ETERNUS CS800.
To access the Company page, on the Contacts page, click the Company tab (see "Company
Page" on page 337).
Figure 240: Company Page
To enter company information:
ETERNUS CS800 337