12.5 VTL Status
Physical View
The Physical View page allows you to view a physical representation of the virtual
components in a VTL. You can view information about virtual tapes drives, storage slots,
and cartridges.
To access the Physical View page, on the VTL Status page, click the Physical View tab (see
"Physical View Page" on page 397).
Figure 276: Physical View Page
Use the controls in the VTL Physical View Information section to select the information to
display:
1. Select the VTL to display in the Partition drop-down box.
2. Click Hide Drives or Show Drives to hide or show the virtual tape drives in the VTL (see
"Tape Drives" on page 397).
3. Click Hide Storage Slots or Show Storage Slots to hide or show the virtual storage
slots in the VTL (see "Storage and I/E Slots" on page 398).
4. Click Hide I/E Slots or Show I/E Slots to hide or show the virtual I/E slots in the VTL
(see "Storage and I/E Slots" on page 398).
Tape Drives
The Tape Drives section displays information about virtual tape drives in the VTL:
ETERNUS CS800 397
To Next Page
Loading...
