Fujitsu ETERNUS CS800 - Page 79

Hardware Description Hard Drive Carrier Indicators
U41842-J-Z125-1-76 79
Dokuschablonen qua19x24 Version 1.1us für FrameMaker V7.x vom 25.03.2010 © cognitas GmbH 2001-2010
1. April 2010 Stand 11:05.09 Pfad: G:\allgemein\CS800\1000500_FTS-Doku\1000502_GettingStartedGuide\GettingStarted.k07
Table 17: 2.5’’ Hard Drive Disk Indicators
If a drive fails, you will be notified by an admin alert in the remote management pages (see
CS800 User Guide).
Item Indicator Description
1 LED 1
(green)
HDD BUSY
● Lights up: HDD in active phase
● Does not light: HDD inactive (drive inactive)
2 LED 2
(orange)
HDD FAULT
(in conjunction with a RAID controller)
● Does not light: no HDD error
● Lights up: HDD Faulty or Rebuild Stopped (drive defective/needs
replacing, a rebuild process was stopped or the HDD module is not
correctly inserted)
● Slow flashing: HDD Rebuild (the data is being restored after
changing a drive)
● Fast flashing: HDD Identify
● Four fast blinks/pause: HDD Predicted Fault
● Two fast flashes/pause: HDD Hot Spare (Hot spare drive active.
The corresponding drive has failed).