New Partition Name The name of the partition the snapshot was recovered
to.
Source System The hostname of the system that the snapshot was
received from.
Started The time the recovery job was started.
Finished The time the recovery job finished.
Status The status of the recovery job (Success, In Progress,
or Failed).
To delete information for a recovery job, select it in the Snapshot Recovery Jobs list and
click Delete Job Info.
Failback Jobs
The Failback Jobs page allows you to view information about snapshot failback operations
that were previously completed. You can also abort a failback that is currently in progress.
To access the Failback Jobs page, on the Receive VTL page, click the Failback Jobs tab
(see "Failback Jobs Page" on page 399).
Figure 252: Failback Jobs Page
The Snapshot Failback Jobs section displays the following information about failback jobs:
Partition Name The name of the partition the snapshot was created from.
Destination System The hostname of the system that the snapshot was sent to.
ETERNUS CS800 399
11 Replication
To Next Page
Loading...
