Fujitsu ETERNUS CS800 - Page 410

12.2 Hardware
Component The name of the component on the system board.
Type The component type (Sensor, Fan, or Power Supply).
Value The value reported by the sensor or component.
Status The status of the component.
Normal - (Green) The component is operating correctly.
Attention - (Yellow) There is a problem with the component.
Failed - (Red) The component has failed.
Host Bus Adapters
The Host Bus Adapters page allows you to view information about installed Fibre Channel
cards and their ports.
The Host Bus Adapters page displays only on ETERNUS CS800 configurations
that include a Fibre Channel card.
To access the Host Bus Adapters page, on the Details page, click the Host Bus Adapters
tab (see "Host Bus Adapters Page" on page 410).
Figure 260: Host Bus Adapters Page
The Host Bus Adapters section displays the following information about each Fibre
Channel card:
410 ETERNUS CS800