EasyManua.ls Logo

Fujitsu ETERNUS DX S5 Series - Table 56 Deduplication;Compression Function Specifications (ETERNUS DX200 S5, ETERNUS DX500 S5; DX600 S5); Table 57 Compression Function Specifications (ETERNUS DX900 S5)

Fujitsu ETERNUS DX S5 Series
335 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The following table provides the function specifications for the Deduplication/Compression.
Table 56 Deduplication/Compression Function Specifications (ETERNUS DX200 S5, ETERNUS DX500 S5/
DX600 S5
)
Model ETERNUS DX200 S5 ETERNUS DX500 S5 ETERNUS DX600 S5
Number of TPPs available for Deduplication/
Compression settings
4 4 8
Maximum logical capacity that can be a
deduplication/compression target
Up to ten times the DATA_CNTNR Volume (*1)
Maximum logical
capacity of the
DATA_CNTNR Volume
(*2)
If the chunk size is 21MB 384TB 1,024TB 1,536TB
If the chunk size is
336MB
6,144TB 16,384TB 24,576TB
Volume type TPV
ยก (*3)
Standard / FTV / WSV /
SDV / SDPV / VVOL / ODX
ยด
System memory capacity (per CE) 128GB (recommended) 128GB or more 192GB or more
*1: If a Deduplication/Compression Volume is created or expanded, expand the DATA_CNTNR Volume according to the total capacity of
the Deduplication/Compression Volumes. If the efficiency of the Deduplication/Compression function cannot be estimated, the
recommended total capacity of Deduplication/Compression Volumes is a capacity smaller than the logical capacity of the
DATA_CNTNR Volume.
*2: When the Deduplication/Compression function is used, the total capacity of the Deduplication/Compression Volumes can be greater
than or equal to the capacity of the DATA_CNTNR Volume. If deduplication/compression is not effective for this case, a write
operation to a Deduplication/Compression Volume may fail due to a capacity shortage of the DATA_CNTNR Volume. The default
logical capacity of the DATA_CNTNR Volume is 32TB.
In addition, if the DATA_CNTNR Volume capacity runs out or is close to running out, an SNMP Trap is sent.
*3: NAS user volumes are not supported.
Table 57 Compression Function Specifications (ETERNUS DX900 S5)
Model ETERNUS DX900 S5
Number of TPPs available for Compression settings 8
Maximum logical capacity that can be a compression target Up to ten times the DATA_CNTNR Volume (*1)
Maximum logical
capacity of the
DATA_CNTNR Volume
(*2)
If the chunk size is 21MB 8PB
If the chunk size is 336MB 48PB
Volume type TPV
ยก
Standard / FTV / WSV / SDV / SDPV / VVOL / ODX
ยด
System memory capacity (per CE) 768GB or more
*1: If a Compression Volume is created or expanded, expand the DATA_CNTNR Volume according to the total capacity of the
Compression Volumes. If the efficiency of the Compression function cannot be estimated, the recommended total capacity of
Compression Volumes is a capacity smaller than the logical capacity of the DATA_CNTNR Volume.
*2: The Compression function can create Compression Volumes whose capacity is equal to or larger than a DATA_CNTNR Volume. In
environments where compression is not effective, a write operation to the Compression Volume may fail due to a capacity shortage
of the DATA_CNTNR Volume. The default logical capacity of the DATA_CNTNR Volume is 32TB.
In addition, if the DATA_CNTNR Volume capacity runs out or is close to running out, an SNMP Trap is sent.
3. SAN Functions
Operations Optimization (Deduplication/Compression)
131 Design Guide

Table of Contents

Other manuals for Fujitsu ETERNUS DX S5 Series

Related product manuals