Fujitsu ETERNUS DX S5 Series - External Views of a High-Density Drive Enclosure; Figure 164 Rear View of a 2.5;3.5 Type Drive Enclosure (When Only One I;O Module Is Installed); Figure 165 Rear View of a 2.5;3.5 Type Drive Enclosure (When Two I;O Modules Are Installed); Figure 166 Front View of a High-Density Drive Enclosure

■
Rear View of a Drive Enclosure
Figure 164 Rear View of a 2.5"/3.5" Type Drive Enclosure (When Only One I/O Module Is Installed)
1 1
2 2
IOM#0
PSU#0 PSU#1
Figure 165 Rear View of a 2.5"/3.5" Type Drive Enclosure (When Two I/O Modules Are Installed)
1 1
2 2
IOM#1IOM#0
PSU#0 PSU#1
1 I/O module (IOM#0, IOM#1)
(Refer to "■ I/O Modules" (page 270).)
2 Power supply unit (PSU#0, PSU#1)
(Refer to "
■ Power Supply Units" (page 271).)
External Views of a High-Density Drive Enclosure
■
Front View of a High-Density Drive Enclosure
Figure 166 Front View of a High-Density Drive Enclosure
1 2 3
6. Hardware Configurations
Drive Enclosure
267 Design Guide