Fujitsu ETERNUS DX S5 Series - System Memory; Figure 176 Controller Installation Order

■
Number of Installable Controller Modules
Install two controllers in a controller enclosure.
■
Installation Order
Install CM#0 first, followed by CM#1.
Figure 176 Controller Installation Order
Rear view of a controller enclosure
Contr
oller 0 (CM#0) Controller 1 (CM#1)
System Memory
This section explains the installation conditions and installation rules for system memory modules.
The ETERNUS DX500 S5/DX600 S5/DX900 S5
are the target ETERNUS DX storage systems.
■
Types of System Memory Modules
The following types of system memory modules are available:
• ETERNUS DX200 S5
- 32GB (16GB ´ 2 ´ 1CM)
- 64GB (32GB ´ 2 ´ 1CM)
• ETERNUS DX500 S5
- 128GB (16GB ´ 4 ´ 2CM)
- 256GB (32GB ´ 4 ´ 2CM)
- 512GB (64GB ´ 4 ´ 2CM)
• ETERNUS DX600 S5
- 192GB (16GB ´ 6 ´ 2CM)
- 384GB (32GB ´ 6 ´ 2CM)
- 768GB (64GB ´ 6 ´ 2CM)
• ETERNUS DX900 S5
- 192GB (16GB ´ 6 ´ 2CM)
- 384GB (32GB ´ 6 ´ 2CM)
- 768GB (64GB ´ 6 ´ 2CM)
- 1,536GB (128GB ´ 6 ´ 2CM)
6. Hardware Configurations
Installation Conditions and Installation Rules
279 Design Guide