*5: Operation can be continued during a failure. The status of the ETERNUS DX can be monitored via ETERNUS Web GUI or ETERNUS CLI.
*6: FEMs are installed in high-density drive enclosures.
■
User Maintenance
Customers can update the following components.
To maintain components that are not described in this section, contact your sales representative or maintenance
engineer.
• Controller firmware
■
User Expansion
Customers can expand (add) the following components.
To add components that are not described in this section, contact your sales representative or maintenance
engineer.
• Drives
• Drive enclosures
• Long wave SFP+ modules (16Gbit/s)
7. Maintenance/Expansion
Hot Swap/Hot Expansion
304 Design Guide
To Next Page
Loading...
