Fujitsu ETERNUS DX S5 Series - Supported Oss (in NAS Environments)

Supported OSs (in NAS Environments)
The ETERNUS DX can be connected to OSs that support available protocols for the ETERNUS DX.
The confirmed OS for NFSv4.0 can be connected to the
ETERNUS DX.
The following OSs are confirmed to connect to the ETERNUS DX as a NAS client.
• The confirmed OSs with the CIFS protocol
- Windows Server 2012
- Windows Server 2012 R2
- Windows Server 2016
- Windows Server 2019
- Windows 8.1
- Windows 10
• The confirmed OSs with the NFSv3 protocol
- Red Hat Enterprise Linux 6.6
- Red Hat Enterprise Linux 6.10
- Red Hat Enterprise Linux 7.2
- Red Hat Enterprise Linux 7.3
- Red Hat Enterprise Linux 7.4
- Red Hat Enterprise Linux 7.6
- Red Hat Enterprise Linux 8.0
- Solaris 10 5/09
- Solaris 11.2
- Solaris 11.3
- VMware vSphere 6.5
- VMware vSphere 6.7
• The confirmed OSs with the NFSv4.0 protocol
The confirmed OSs for the NFSv4.0 protocol are used as supported OSs.
- Red Hat Enterprise Linux 6.6
- Red Hat Enterprise Linux 6.10
- Red Hat Enterprise Linux 7.2
- Red Hat Enterprise Linux 7.3
- Red Hat Enterprise Linux 7.4
- Red Hat Enterprise Linux 7.6
- Solaris 10 5/09
- Solaris 11.2
- Solaris 11.3
• The confirmed OSs with FTP / FXP
Regardless of the OS type, access is possible as long as an FTP client is used.
Caution
During the design phase
• Microsoft-provided Windows NFS service cannot be used.
A. Specifications
Operating Environment
316 Design Guide