Fujitsu ETERNUS DX S5 Series - Audit Log; Figure 39 Audit Log

Audit Log
The ETERNUS DX can send information such as access records by the administrator and setting changes as audit
logs to the Syslog servers.
Audit logs are audit trail information that record operations that are executed for the ETERNUS DX and the
response from the system. This information is required for auditing.
The audit log function enables monitoring of all operations and any unauthorized access that may affect the
system.
Syslog protocols (RFC3164 and RFC5424) are supported for audit logs.
Information that is to be sent is not saved in the
ETERNUS DX and the Syslog protocols are used to send out the
information. Two Syslog servers can be set as the destination servers in addition to the Syslog server that is used
for event notification.
Figure 39 Audit Log
Syslog serverETERNUS DX
System administrator
Log in
Log out
Change settings
↓
↓
Information such as
the storage system name,
the user/role,
the process time,
the process details,
and the process results
Audit log
2. Basic Functions
User Access Management
92 Design Guide