A confirmation screen appears.
4 Click the [OK] button.
The volume is created and the registration completion screen appears.
5 Click the [Done] button.
The screen returns to the [Volume] screen.
6 Then, create SDV and SDPV in the backup RAID group (RG1).
For the creation procedure, refer to "Generation Management Volume (SDV) Creation" (page 117) and
"Copy Data Destination Volume (SDPV) Creation" (page 118).
6. Configuration Settings for RAID Groups or Thin Provisioning
When Using Standard Volumes
113 Configuration Guide (Basic)
To Next Page
Loading...
