2 Select the drive that is to be registered as the Global Hot Spare and click [Assign Global HS] in [Action].
A confirmation screen appears.
3 Click the [OK] button.
The Global Hot Spare is registered and the registration completion screen appears.
4 Click the [Done] button.
The screen returns to the [Drives] screen.
Dedicated Hot Spare Registration
The procedure to register a Dedicated Hot Spare is as follows:
1 Click the [Component] tab on the navigation of the ETERNUS Web GUI screen. On the [Component]
screen, click [Drives] in [Category].
The [Drives] screen appears.
6. Configuration Settings for RAID Groups or Thin Provisioning
When Using Standard Volumes
115 Configuration Guide (Basic)
To Next Page
Loading...
