Setting Procedures in This Manual
Detailed information about the setup parameters (descriptions and input conditions in the procedure) and the
status displays is described in "ETERNUS Web GUI User's Guide".
Note that the screen shots in this manual may be different from the actual screens.
Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
Warning Labels and Manufacturer's Labels
Warning labels, manufacturer's labels, and a device ID label are found in the ETERNUS DX, as shown in the
example below.
Never remove these labels from the equipment or allow them to become dirty.
Frontend Enclosures
Device ID label
The model name and
the serial number are
listed.
Manufacturer's label
The model name and
the serial number are listed.
Preface
12 Configuration Guide (Basic)
To Next Page
Loading...
