The main setting items are as follows.
• New Volume
- Name
- Capacity
- Allocation
• Manual Setting
- Start of Suffix
- Digits of Suffix
- Volume No.
- Number of Volumes (*1)
*1
: Specify the value in the "Number of Volumes" field for the TPP in which the volumes are to be created.
Note
When specifying the volume number, select the "Set Value" checkbox and input the volume
number.
3 Click the [Create] button.
4 A confirmation screen appears. Click the [OK] button.
Volume creation starts.
5 Click the [Done] button to return to the [Volume] screen.
6. Configuration Settings for RAID Groups or Thin Provisioning
When Using Thin Provisioning Volumes (TPVs)
132 Configuration Guide (Basic)
To Next Page
Loading...
