2 Click the [Browse...] button for the host group.
The [Select Host Group] screen appears.
3 Select the connection target.
n When "Host Group" is selected
Select a host group to configure a host affinity, and click the [OK] button.
The display returns to the initial screen.
n When "All" is selected
Select a host response, and then click the [OK] button.
Note
Select "All" when assigning CA port groups to any host instead of a specific host. If "All" is
selected, a host response for the CA port group must be selected. In this case, "All" is displayed
in the "All (host response name)" format.
7. Host Interface Management
Host Affinity Creation
153 Configuration Guide (Basic)
To Next Page
Loading...
