Fujitsu ETERNUS DX S5 Series - Page 20

2 Check that the READY LED of the controller enclosure or the frontend enclosure is lit up. For details about
the time required until the READY LED is turned on, refer to the table described in "IMPORTANT" of
"Powering On
" (page 18).
ETERNUS DX60 S5/DX100 S5/DX200 S5 ETERNUS DX500 S5/DX600 S5
Controller enclosure
Drive enclosure
Frontend enclosure
ETERNUS DX900 S5
Controller enclosure
Drive enclosure
1. Basic Operation
Powering On and Off
20 Operation Guide (Basic)