3 Remove the front cover of the high-density drive enclosure.
4 Remove the four M5 screws that are used to fasten the high-density drive enclosure in the rack pillar.
(Rack pillar: front)
(Rack pillar: rear)
M5 screws
M5 screws
Chapter 5
Component Expansion/Function Enhancement
5.1 Installing Additional Drives
74
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0
To Next Page
Loading...
