Fujitsu ETERNUS DX100 S3 - Page 76

8 Open the top board.
9 Remove the dummy drive unit from the slot in which the drive is to be installed.
(1) Pull the catch on the lock lever of the dummy drive unit to unlock the lock lever, and then open
the lock lever upward.
(2) Pull up the dummy drive unit in a straight direction.
Chapter 5
Component Expansion/Function Enhancement
5.1 Installing Additional Drives
76
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0