Fujitsu ETERNUS DX100 S3 - Page 44

Chapter 3 Initial Setup
3.2 Initial Setup 2
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
44
The main setting items are as follows.
- User Name
- MIB View Setting
- Authentication
- Authentication Method
- Authentication Password
- Retype Authentication Password
- Encryption
- Encryption Method
- Encryption Password
- Retype Encryption Password
7-3 Click the [OK] button.
 Returns to the original screen.
7-4 Repeat Step 7-1 through Step 7-3 to configure several user information.
7-5 When the setting of the user information is complete, click the [Next >>] button.
 A confirmation screen appears.
7-6 Click the [OK] button.
 The SNMP Agent User setting starts.
7-7 Click the [Done] button.