Fujitsu ETERNUS DX100 S3 - Page 1048

Appendix D Supported Functions for Each Controller Firmware Version
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
1048
Host-LU QoS Management
Enable/Disable QoS ✓✓✓✓✓✓✓✓✓
Initialize QoS – – – ✓✓✓✓✓✓
Set Host-LU QoS ✓✓✓✓✓✓✓✓✓
Release Host-LU QoS ✓✓✓✓✓✓✓✓✓
Start Host-LU QoS
Performance
Monitoring
✓✓✓✓✓✓✓✓✓
Stop Host-LU QoS
Performance
Monitoring
✓✓✓✓✓✓✓✓✓
Set FC/FCoE Host QoS ✓✓✓✓✓✓✓✓✓
Set iSCSI Host QoS ✓✓✓✓✓✓✓✓✓
Set SAS Host QoS – – – ✓✓✓✓✓✓
Set FC Port QoS ✓✓✓✓✓✓✓✓✓
Set iSCSI Port QoS ✓✓✓✓✓✓✓✓✓
Set SAS Port QoS – – – ✓✓✓✓✓✓
Set FCoE Port QoS ✓✓✓✓✓✓✓✓✓
Add LU QoS Group ✓✓✓✓✓✓✓✓✓
Delete LU QoS Group ✓✓✓✓✓✓✓✓✓
Modify LU QoS Group ✓✓✓✓✓✓✓✓✓
NAS Management
Create Shared Folder – ✓✓✓✓✓✓✓✓
Delete Shared Folder – ✓✓✓✓✓✓✓✓
Modify Shared Folder – ✓✓✓✓✓✓✓✓
Create NAS Interface – ✓✓✓✓✓✓✓✓
Delete NAS Interface – ✓✓✓✓✓✓✓✓
Modify NAS Interface – ✓✓✓✓✓✓✓✓
Change NAS Server
Name
––✓✓✓✓✓✓✓
Set DNS Server – – ✓✓✓✓✓✓✓
Set Authentication
Server
– ✓✓✓✓✓✓✓✓
Add Quota Setting –––––––✓✓
Delete Quota Setting–––––––✓✓
Modify Quota Setting–––––––✓✓
Function
Controller firmware version
V10L10 V10L14 V10L16 V10L20 V10L21 V10L30 V10L32 V10L33 V10L40